Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 160 lbs/hr
Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 160 lbs/hr
SKU: SKU: 81050-160
Low stock
Product Details
Features
- Compatible with LS1, LS2, LS6, and Coyote TSP intake manifolds
- Includes EV1M to EV6F adapters
- Available with flow rates of 36 to 160 lbs/hr
Description
With TSP's high-flow Velocity fuel injectors, you can expect reliable delivery of the precise amount of fuel every time. TSP Velocity fuel injectors are made in the USA, assembled with top-quality parts and trusted techniques. The 81050 injector is designed to fit TSP's LS1/LS2/LS6 and Coyote 5.0L Velocity intakes and rails.
Specs
| Driver Type | 12V Saturated Circuit |
| Flow Rate | 160 lbs./hr. |
| Fuel Injection Type | Multi-port |
| Fuel Rail O-ring Outer Diameter | 0.551 in. |
| Fuel Type | Gas |
| Impedance | High |
| Injector Plug Style | USCAR |
| Manifold O-ring Outer Diameter | 0.551 in. |
| Maximum Outside Diameter | 0.551 in. |
| O-Ring Quantity | 2 |
| O-rings Included | Yes |
| Quantity | Set of 8 |
| Seat to Seat Height | 2.078 in. |
| Terminal Gender | Male |
| Terminal Quantity | 2 |
| Terminal Type | Blade |
Engine Fitment
FITS THE FOLLOWING TSP VELOCITY COMBINATIONS:
• 81001 LS1/LS2/LS6 Intake Manifold with 81008 Fuel Rails
• 81002 LS1/LS2/LS6 Intake Manifold with 81008 Fuel Rails
• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails
NOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).
Q&A
What applications are these fuel injectors compatible with?
These fuel injectors are designed for FITS THE FOLLOWING TSP VELOCITY COMBINATIONS:.
Will these injectors fit GM LS applications?
Yes, these injectors are designed for compatible GM LS-based applications and should be matched to your fuel system and tuning setup.
What size are these fuel injectors?
These injectors are rated at 160 lbs./hr., which determines how much fuel they can deliver and should be matched to your horsepower goals.
What impedance are these injectors?
These injectors are high, so they should match your ECU and wiring setup.
What fuel type are these injectors designed for?
These injectors are designed for use with gas.
Will I need tuning after installing these injectors?
Yes, larger or different injectors typically require ECU tuning to ensure proper fueling and performance.
Do these injectors come ready to install?
These injectors are designed for installation, but seals, adapters, or tuning may be required depending on your setup.
Are these a good upgrade over stock injectors?
Yes, performance fuel injectors can support higher horsepower levels and improved fuel delivery when matched to the correct setup.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Velocity High-Flow Fuel Injectors for LS1, LS2, LS6, and 5.0L Coyote, 160 lbs/hr
With TSP's high-flow Velocity fuel injectors, you can expect reliable delivery of the precise amount of fuel every time. TSP Velocity fuel injectors are made in the USA, assembled with top-quality parts and trusted techniques. The 81050 injector is designed to fit TSP's LS1/LS2/LS6 and Coyote 5.0L Velocity intakes and rails.
FITS THE FOLLOWING TSP VELOCITY COMBINATIONS:
• 81001 LS1/LS2/LS6 Intake Manifold with 81008 Fuel Rails
• 81002 LS1/LS2/LS6 Intake Manifold with 81008 Fuel Rails
• 84050 Ford 5.0L Coyote Intake Manifold with 84051 Fuel Rails
NOTE: Fitment with LS1 requires conversion from EV1M to EV6F connectors (adapters included).
Specifications:Driver Type: 12V Saturated Circuit
Flow Rate: 160 lbs./hr.
Fuel Injection Type: Multi-port
Fuel Rail O-ring Outer Diameter: 0.551 in.
Fuel Type: Gas
Impedance: High
Injector Plug Style: USCAR
Manifold O-ring Outer Diameter: 0.551 in.
Maximum Outside Diameter: 0.551 in.
O-Ring Quantity: 2
O-rings Included: Yes
Quantity: Set of 8
Seat to Seat Height: 2.078 in.
Terminal Gender: Male
Terminal Quantity: 2
Terminal Type: Blade
