V Series Ford 5.0L Coyote Billet Aluminum Valve Covers with Coil Covers - Natural

• Billet aluminum construction with a natural finish for a raw, machined engine bay look

• Matching billet coil covers included for a complete, uniform top-of-engine look

• Fits Gen 1/2 Ford 5.0L Coyote V8 (2011–2017, 302 CID) — not Gen 3+

• One-piece O-ring gasket and full hardware set for a complete, clean install

These valve covers are built for the Gen 1 and Gen 2 Ford 5.0L Coyote V8 (302 CID), covering 2011–2014 and 2015–2017 engines. They are not compatible with the 2018–2023 Gen 3 Coyote (307 in³) — Gen 3 uses a different bore size, coil pack layout, and PCV/breather location, so Gen 1/2 and Gen 3+ valve covers are not interchangeable.

Construction is billet aluminum with a natural (unfinished, machined) surface, using a perimeter-bolt mounting pattern and a one-piece O-ring gasket for even sealing across the cover. This set includes matching billet aluminum coil covers, along with mounting hardware, grommets, an oil filler cap, dipstick provision, and evaporator hose fitting block-offs, so the full top of the engine installs as one complete, uniform-looking package.

Because the covers use factory-style mounting locations, clearance should be confirmed against aftermarket superchargers, strut tower braces, or other swap-specific accessories before installation.

Applications
Fits the Ford 5.0L Coyote V8, Gen 1 (2011–2014) and Gen 2 (2015–2017), 302 CID. Applications include Ford Mustang GT, Ford F-150 5.0L, Ford Performance Coyote crate engines, and Coyote engine swap applications using a Gen 1/2 long block. Will not fit 2018–2023 Gen 3 Coyote engines (307 in³) — confirmed incompatible.

Installation
Covers use factory-style valve cover mounting locations with a perimeter-bolt pattern and a one-piece O-ring gasket. Mounting hardware, grommets, oil filler cap, dipstick provision, and evaporator hose fitting block-offs are included. Confirm clearance against aftermarket superchargers, strut tower braces, and other swap-specific accessories before installation, along with generation-specific PCV, breather, and oil fill compatibility.

Does this fit the 2018 or newer Coyote engine?
No. These valve covers are designed for Gen I (2011–2014) and Gen II (2015–2017) Ford 5.0L Coyote V8 engines only. They are not compatible with the Gen III (2018–2023) or newer Coyote engines, which feature revised cylinder heads, ignition coil mounting, and PCV/breather configurations.

Are coil covers included with this set?
Yes. This kit includes matching billet aluminum coil covers, providing a uniform, finished appearance across the top of the engine.

Will these clear an aftermarket supercharger or strut tower brace?
These valve covers use the factory-style mounting locations found on Gen I and Gen II Coyote engines. Because supercharger systems, strut tower braces, and other aftermarket components vary by manufacturer and vehicle, verify clearance for your specific combination before installation.

Is this the same as a "Ford Modular" valve cover?
No. These valve covers are designed specifically for the Ford 5.0L Coyote DOHC V8 engine. They are not compatible with earlier Ford Modular 4.6L or 5.4L SOHC or DOHC engines, which use a different cylinder head and valve cover design.

What's included with this set?
This kit includes matching billet aluminum coil covers, valve covers, mounting hardware, grommets, one-piece O-ring gaskets, an oil filler cap, a dipstick provision, and evaporative hose fittings with block-off plugs for installation.

Does this fit a Ford Performance Coyote crate engine?
Yes. These valve covers are compatible with Ford Performance Gen I and Gen II 5.0L Coyote crate engines that use the factory-style valve cover mounting pattern.

How is this different from the version without coil covers?
This version includes matching billet aluminum coil covers for a complete, coordinated appearance. Both versions share the same Gen I/II Coyote fitment, valve covers, gasket style, mounting hardware, and overall construction.

What's the gasket style, and is it included?
Yes. A one-piece O-ring gasket is included for installation. The gasket is designed to provide an even, reliable seal around the entire perimeter of the valve cover.