Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Black
Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Black
SKU: SKU: SP8941BK
Out of stock
Product Details
Features
- Fits GM Saginaw power steering power steering pump pulley applications with saginaw and press fit attachment
- Steel construction with black finish with V-Belt, 1-groove, 1/2" belt/groove width, 5.750" OD, 3/4" bore
- Supports standard-drive setup
- Confirm pulley offset, shaft fit, belt style, groove count, and hardware requirements before installation
Description
Power Steering Pump Pulley Fit & Belt Alignment:This pulley is built for GM Saginaw power steering pump applications, with the key dimensions needed to match belt routing, accessory position, and pulley spacing.
Spec-Driven Compatibility:V-Belt, 1-groove, 5.750" outside diameter, 1/2" width, 3/4" bore help determine correct fitment for the accessory drive system. It is configured for Saginaw setups. Match groove count, belt style, bore size, and pulley offset before installation.
Material, Finish & Drive Reliability:Steel construction with black finish supports belt tracking, durability, and clean front-drive appearance. Verify mounting hardware, shaft fit, and belt alignment before installation.
Specs
| Pump Style | Saginaw |
| Pulley Style | V-Belt |
| Groove Quantity | 1 |
| Groove Width | 1/2" |
| Pulley Attachment | Press Fit |
| Pulley Bore | 3/4" |
| Pulley Material | Steel |
| Outside Diameter | 5.750" |
| Underdrive | No |
| Overdrive | No |
| Hardware | Not Included |
| Quantity | Sold Individually |
Engine Fitment
COMPATIBLE WITH
• GM Saginaw power steering systems
• GM hydraulic steering pump applications
• Custom street and performance steering setups
• Aftermarket accessory drive systems
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
Chevrolet Camaro / Chevelle / Nova
Chevrolet C10 / K10 / truck applications
GM muscle car and street rod power steering conversions
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
• Chevrolet Camaro
• Chevrolet Chevelle
• Chevrolet Nova
• Chevrolet C10
• GMC C/K Series
Q&A
What applications is this power steering component compatible with?
This power steering component is designed for FITS SAGINAW STYLE POWER STEERING PUMPS.
Will this power steering component fit my engine?
This component is intended for compatible vehicle applications and should match your steering system and bracket setup.
What does a power steering pump do?
A power steering pump provides hydraulic pressure to assist steering, making it easier to turn the wheels.
What material is this component made from?
This component is made from aluminum, offering durability and reduced weight.
Do I need a pulley for this power steering pump?
Yes, a compatible pulley is required if not included.
Do I need a reservoir for this power steering setup?
Yes, a reservoir is required to hold power steering fluid if not included.
Will this improve steering performance?
Yes, a properly matched power steering pump can improve steering feel and responsiveness.
Is this a good upgrade over a stock power steering pump?
Yes, aftermarket power steering components can improve durability, performance, and appearance.
Do I need to bleed the system after installation?
Yes, the power steering system should be properly bled after installation to remove air and ensure smooth operation.
Can this be used on performance or custom builds?
Yes, power steering components are commonly used in performance and custom builds.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Power Steering Pump 3/4" Press Fit Single 1/2" Groove Steel Pulley - Black
Built for dependable steering assist in compatible GM hydraulic systems, this Saginaw-style power steering pump is designed to provide steady fluid pressure, smooth steering response, and reliable operation.
The pump housing and internal components are engineered to support consistent fluid flow during parking, low-speed maneuvering, and normal street driving while maintaining clean underhood appearance.
Designed for restoration, swap, and performance applications, this pump should be matched with the correct pulley, brackets, pressure fitting, return hose, and steering gear or rack requirements.
Verify belt alignment, pulley spacing, hose routing, pressure fitting style, and reservoir clearance before installation to help maintain proper steering system performance.
COMPATIBLE WITH
• GM Saginaw power steering systems
• GM hydraulic steering pump applications
• Custom street and performance steering setups
• Aftermarket accessory drive systems
NOTES
Verify pump shaft diameter, press-fit or keyed attachment, pulley offset, and belt alignment before installation.
COMMON VEHICLE APPLICATIONS
• Chevrolet Camaro
• Chevrolet Chevelle
• Chevrolet Nova
• Chevrolet C10
• GMC C/K Series
SPECIFICATIONS
Pump Style: Saginaw
Pulley Style: V-Belt
Groove Quantity: 1
Groove Width: 1/2"
Pulley Attachment: Press Fit
Pulley Bore: 3/4"
Pulley Material: Steel
Outside Diameter: 5.750"
Underdrive: No
Overdrive: No
Hardware: Not Included
Quantity: Sold Individually
