Micro Electric 35 gph 4-7 PSI Diesel Fuel Pump with Filter for Carburetor
Micro Electric 35 gph 4-7 PSI Diesel Fuel Pump with Filter for Carburetor
SKU: SKU: JM1033
In stock
Product Details
Features
- External electric pump design for compatible fuel-system upgrades
- Fuel delivery rated at 35 GPH
- Designed for 7 PSI output requirements
- Verify fuel type, filter micron rating, wiring, and mounting location before installation
Description
Designed for upgraded fuel delivery systems, this electric fuel pump setup supports dependable fuel movement in GM LT Series fuel-system applications. The 35 GPH flow rating and 4 PSI to 7 PSI pressure capability help provide the fuel supply needed when the pump is matched to the correct regulator, filter, wiring, and line size.
Electric Fuel Delivery
The external electric pump design is built for consistent fuel transfer and stable operation when properly mounted and wired. Its 35 GPH flow specification and 12 V electrical requirement should be matched to the vehicle fuel demand, relay setup, and fuel-system layout.
Pressure & Filtration Support
The pump supports up to 4 PSI to 7 PSI and includes filtration down to 100 to help protect the fuel system and maintain clean fuel delivery.
Construction & Mounting
Durable construction supports long-term service for secure placement when the pump is installed away from excessive heat and debris.
Installation & System Matching
Verify fuel type compatibility, pump location, wiring capacity, regulator selection, filter orientation, hose size, and fitting style before installation. Proper system matching helps support reliable fuel delivery and long-term pump operation.
Specs
| Compatible Fuel Type | Diesel |
| Filter Micron Rating | 100 |
| Filter Type | In-line |
| Fuel Delivery Type | Carburetor |
| Fuel Sending Unit Included | No |
| Fuel Type | Diesel |
| Gasket Or Seal Included | No |
| Hose Size | 0.3125 in. |
| Inlet Fitting Thread Size | 0.125 in. NPT |
| Inlet Type | Threaded |
| Internal Or External | External |
| Maximum Flow Rating | 35 GPH |
| Maximum Pressure | 7 PSI |
| Minimum Pressure | 4 PSI |
| Mounting Hardware Included | Yes |
| Negative Ground | Yes |
| Outlet Fitting Thread Size | 0.125 in. NPT |
| Outlet Quantity | 1 |
| Outlet Type | Threaded |
| Regulator Included | No |
| Universal Or Specific Fit | Universal |
| Voltage | 12 V |
| Wire Quantity | 2 |
Engine Fitment
COMPATIBLE WITH
UNIVERSAL
Gravity feed type pump designed to be installed as low as possible within 12" of the fuel tank
Intended for diesel.
COMMON VEHICLE APPLICATIONS
Universal inline fuel delivery for compatible carbureted or EFI fuel systems
Fuel cell, tank-mounted pickup, or external inline pump installations where specifications match
Custom fuel system upgrades using matching pressure, flow, filtration, and wiring requirements
NOTES
Verify flow rating, pressure range, fuel type, filtration, wiring, and mounting location before installation.
Use proper fuel hose, clamps, electrical protection, and grounding for the application.
Not a direct vehicle-specific replacement unless all specifications match the existing fuel system.
Q&A
What applications is this fuel pump compatible with?
This fuel pump is designed for UNIVERSAL, Gravity feed type pump designed to be installed as low as possible within 12" of the fuel tank, Intended for diesel..
Will this fuel pump work with my engine?
This fuel pump is intended for performance applications and should be matched to your fuel system type and pressure requirements.
What does a fuel pump do?
A fuel pump delivers fuel from the tank to the engine at the correct pressure and volume to support proper combustion.
How do I choose the correct fuel pump flow rate?
Fuel pump flow rate should be selected based on horsepower goals and fuel system demand.
What voltage does this fuel pump use?
This fuel pump operates on a 12 V electrical system.
Is this an electric or mechanical fuel pump?
Fuel pump type should be confirmed in the specifications, but performance pumps are typically electric for higher-demand applications.
Is this fuel pump for carbureted or EFI systems?
This fuel pump is designed for diesel fuel systems, and compatibility should be verified with your setup.
Do I need a fuel pressure regulator with this pump?
Depending on your setup, a fuel pressure regulator may be required to control fuel pressure properly.
Will this fuel pump support higher horsepower?
Yes, a higher-capacity fuel pump can support increased horsepower when properly matched to the engine setup.
Is this fuel pump suitable for performance builds?
Yes, this fuel pump is designed to support performance-oriented fuel systems and upgraded engine combinations.
Will this fuel pump improve fuel delivery over stock?
Yes, performance fuel pumps typically provide more consistent fuel delivery compared to stock units.
Do I need tuning after installing this fuel pump?
Fuel system upgrades may require tuning or adjustment to maintain proper air-fuel ratios.
Is this a good upgrade from a stock fuel pump?
Yes, this fuel pump is a strong upgrade for improving fuel delivery and supporting increased engine demand.
Can this fuel pump be used with upgraded injectors or carburetors?
Yes, this pump can support upgraded fuel systems when matched correctly to the engine and fuel requirements.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
Micro Electric 35 gph 4-7 PSI Diesel Fuel Pump with Filter for Carburetor
Designed for upgraded fuel delivery systems, this electric fuel pump setup supports dependable fuel movement in GM LT Series fuel-system applications. The 35 GPH flow rating and 4 PSI to 7 PSI pressure capability help provide the fuel supply needed when the pump is matched to the correct regulator, filter, wiring, and line size.
Electric Fuel Delivery
The external electric pump design is built for consistent fuel transfer and stable operation when properly mounted and wired. Its 35 GPH flow specification and 12 V electrical requirement should be matched to the vehicle fuel demand, relay setup, and fuel-system layout.
Pressure & Filtration Support
The pump supports up to 4 PSI to 7 PSI and includes filtration down to 100 to help protect the fuel system and maintain clean fuel delivery.
Construction & Mounting
Durable construction supports long-term service for secure placement when the pump is installed away from excessive heat and debris.
Installation & System Matching
Verify fuel type compatibility, pump location, wiring capacity, regulator selection, filter orientation, hose size, and fitting style before installation. Proper system matching helps support reliable fuel delivery and long-term pump operation.
COMPATIBLE WITH:
UNIVERSAL
Gravity feed type pump designed to be installed as low as possible within 12" of the fuel tank
Intended for diesel.
COMMON VEHICLE APPLICATIONS:
Universal inline fuel delivery for compatible carbureted or EFI fuel systems
Fuel cell, tank-mounted pickup, or external inline pump installations where specifications match
Custom fuel system upgrades using matching pressure, flow, filtration, and wiring requirements
NOTES:
Verify flow rating, pressure range, fuel type, filtration, wiring, and mounting location before installation.
Use proper fuel hose, clamps, electrical protection, and grounding for the application.
Not a direct vehicle-specific replacement unless all specifications match the existing fuel system.
SPECIFICATIONS:
Compatible Fuel Type: Diesel
Filter Micron Rating: 100
Filter Type: In-line
Fuel Delivery Type: Carburetor
Fuel Sending Unit Included: No
Fuel Type: Diesel
Gasket Or Seal Included: No
Hose Size: 0.3125 in.
Inlet Fitting Thread Size: 0.125 in. NPT
Inlet Type: Threaded
Internal Or External: External
Maximum Flow Rating: 35 GPH
Maximum Pressure: 7 PSI
Minimum Pressure: 4 PSI
Mounting Hardware Included: Yes
Negative Ground: Yes
Outlet Fitting Thread Size: 0.125 in. NPT
Outlet Quantity: 1
Outlet Type: Threaded
Regulator Included: No
Universal Or Specific Fit: Universal
Voltage: 12 V
Wire Quantity: 2
