Ford Small Block Pro Series Stainless Steel 1.6 Ratio 3/8" Needle Bearing Roller Rocker Arms
Ford Small Block Pro Series Stainless Steel 1.6 Ratio 3/8" Needle Bearing Roller Rocker Arms
SKU: SKU: 71363
In stock
Product Details
Features
- Pro Series Performance
- Stainless Steel Durability
- Engine-Specific Fitment
- Set of 16
Description
If you're looking to beef up your valvetrain, you can't go wrong with a set of TSP Pro Series Full Roller Rocker Arms. These rockers are a functional and fashionable addition to any Small Block Chevy. Stainless steel construction ensures long-term strength. With roller fulcrums and needle-bearing tips and a relief for added valve spring clearance, these rocker arms are designed for stock or aftermarket engines.
Specs
| Grade Type | Performance |
| Material | Stainless Steel |
| Maximum RPM | 7,000 |
| Mounting Type | Stud |
| Open Pressure Rating | 500 lbs. |
| Quantity | 16 |
| Rocker Arm Body Style | Standard |
| Rocker Arm Finish | Natural |
| Rocker Arm Material | Stainless Steel |
| Rocker Arm Nut Type | Polylock |
| Rocker Arm Ratio | 1.6 |
| Rocker Arm Type | Full Roller |
| Self Aligning | No |
| Shims Included | No |
| Stud Thread Diameter | 3/8 in. |
| Tip Style | Needle Bearing |
Fitment
COMPATIBLE WITH
FORD SMALL BLOCK WINDSOR V8
• 3.6 L / 221 in3
• 4.7 L / 289 in3
• 5.0 L / 302 in3
• 5.8 L / 351 in3
NOTE: Will not fit 351C or 351M
Emissions Notice
This Top Street Performance (TSP) product is designed for racing and off-road competition use only. It is not legal for use on public roads or emissions-controlled vehicles and does not comply with federal, state, or local emissions regulations. The buyer assumes all responsibility for legal use and installation.
What is a Emissions-Controlled Vehicle?
"An emissions-controlled vehicle is any vehicle equipped with a factory-installed emissions control system designed to reduce air pollution. These systems include catalytic converters, oxygen sensors, EGR (Exhaust Gas Recirculation) valves, and diesel particulate filters (DPF). Most vehicles manufactured after 1975 are considered emissions-controlled and must comply with federal and state emissions laws when used on public roads."
Ford Small Block Pro Series Stainless Steel 1.6 Ratio 3/8" Needle Bearing Roller Rocker Arms
If you're looking to beef up your valvetrain, you can't go wrong with a set of TSP Pro Series Full Roller Rocker Arms. These rockers are a functional and fashionable addition to any Small Block Chevy. Stainless steel construction ensures long-term strength. With roller fulcrums and needle-bearing tips and a relief for added valve spring clearance, these rocker arms are designed for stock or aftermarket engines.
Compatible with:
FORD SMALL BLOCK WINDSOR V8
• 3.6 L / 221 in3
• 4.7 L / 289 in3
• 5.0 L / 302 in3
• 5.8 L / 351 in3
NOTE: Will not fit 351C or 351M
| Grade Type | Performance |
| Material | Stainless Steel |
| Maximum RPM | 7,000 |
| Mounting Type | Stud |
| Open Pressure Rating | 500 lbs. |
| Quantity | 16 |
| Rocker Arm Body Style | Standard |
| Rocker Arm Finish | Natural |
| Rocker Arm Material | Stainless Steel |
| Rocker Arm Nut Type | Polylock |
| Rocker Arm Ratio | 1.6 |
| Rocker Arm Type | Full Roller |
| Self Aligning | No |
| Shims Included | No |
| Stud Thread Diameter | 3/8 in. |
| Tip Style | Needle Bearing |
