Chevy Corvette V8 HEI Distributor with Mechanical Tach Drive
Chevy Corvette V8 HEI Distributor with Mechanical Tach Drive
SKU: SKU: JM6515R
In stock
Product Details
Features
- Compatible with small block 262-400 and big block Mark IV 396-454
- Includes mechanical tach drive
- 1-Year Warranty
Description
TSP’s HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup. This distributor also comes with a mechanical tachometer drive, so it's perfect for Corvette applications.
This distributor is designed for a 12 volt electrical system with an alternator. It is not compatible with a generator and cannot be used with a ballast resistor.
Specs
| Trigger Type | Magnetic |
| Advance Type | Mechanical And Vacuum |
| Color | Black |
| Terminal Gender | Male |
| Mechanical Tach Drive | No |
| Slip Collar | No |
| Coil Included | Yes |
| Coil Type | Internal |
| Coil Output | 65000 V |
| Gear Material | Steel |
| Housing Material | Machined Aluminum |
| Ignition Box Required | No |
| Marine Use | No |
| Cylinders | 8 |
| Vacuum Advance Adjustment Tool | Included |
| Installation Instructions | Included |
Engine Fitment
COMPATIBLE WITH
CHEVROLET BIG BLOCK V8 GEN. II (MARK IV)
• 6.5 L / 396 in3
• 6.6 L / 402 in3
• 7.4 L / 454 in3
CHEVROLET SMALL BLOCK V8 GEN. I
• 4.3 L / 262 in3
• 4.3 L / 265 in3
• 4.4 L / 267 in3
• 4.6 L / 283 in3
• 4.9 L / 302 in3
• 5.0 L / 305 in3
• 5.0 L / 307 in3
• 5.4 L / 327 in3
• 5.7 L / 350 in3
• 6.6 L / 400 in3
NOTE: Will not fit tall deck blocks.
Will not fit if using a governor.
Distributor gear is most compatible with cast iron hydraulic or solid flat tappet camshafts; consult cam manufacturer for recommended gear material.
Q&A
What applications is this distributor compatible with?
This distributor is designed for COMPATIBLE WITH, CHEVROLET BIG BLOCK V8 GEN. II (MARK IV), 6.5 L / 396 in3, 6.6 L / 402 in3, 7.4 L / 454 in3, CHEVROLET SMALL BLOCK V8 GEN. I, 4.3 L / 262 in3, 4.3 L / 265 in3, 4.4 L / 267 in3, 4.6 L / 283 in3, 4.9 L / 302 in3, 5.0 L / 305 in3, 5.0 L / 307 in3, 5.4 L / 327 in3, 5.7 L / 350 in3, 6.6 L / 400 in3, NOTE: Will not fit tall deck blocks., Will not fit if using a governor., Distributor gear is most compatible with cast iron hydraulic or solid flat tappet camshafts; consult cam manufacturer for recommended gear material..
Will this distributor fit my engine?
This distributor is intended for Chevy/GM applications and should match your engine type and ignition system.
What does a distributor do?
A distributor routes high-voltage electricity from the ignition system to each cylinder at the correct time.
What type of advance does this distributor use?
This distributor uses mechanical and vacuum advance, which affects ignition timing performance.
What type of distributor gear is included?
This distributor includes a steel gear, which should be matched to your camshaft material.
Does this distributor include an ignition coil?
Yes, this distributor includes an ignition coil.
Will this distributor improve ignition performance?
Yes, a performance distributor can improve spark delivery and engine efficiency.
Is this a good upgrade over a stock distributor?
Yes, aftermarket distributors can provide improved reliability and performance over stock units.
Do I need to set timing after installing this distributor?
Yes, ignition timing should be properly set after installation for optimal performance.
Can this distributor be used in performance builds?
Yes, distributors are commonly used in performance and custom engine builds.
Emissions Notice
This Top Street Performance (TSP) product is designed for racing and off-road competition use only. It is not legal for use on public roads or emissions-controlled vehicles and does not comply with federal, state, or local emissions regulations. The buyer assumes all responsibility for legal use and installation.
What is a Emissions-Controlled Vehicle?
"An emissions-controlled vehicle is any vehicle equipped with a factory-installed emissions control system designed to reduce air pollution. These systems include catalytic converters, oxygen sensors, EGR (Exhaust Gas Recirculation) valves, and diesel particulate filters (DPF). Most vehicles manufactured after 1975 are considered emissions-controlled and must comply with federal and state emissions laws when used on public roads."
Chevy Corvette V8 HEI Distributor with Mechanical Tach Drive
TSP’s HEI Distributor has everything you need, all under one cap. With a high-quality aluminum housing and hardened steel dual bushing construction, it is built to last. It features fully adjustable mechanical and vacuum advances, meaning precision is a breeze. It has a high-output module, high-spark 65,000 volt coil, solid brass terminals, and an easy one-wire hookup. This distributor also comes with a mechanical tachometer drive, so it's perfect for Corvette applications.
This distributor is designed for a 12 volt electrical system with an alternator. It is not compatible with a generator and cannot be used with a ballast resistor.
Compatible with:
CHEVROLET BIG BLOCK V8 GEN. II (MARK IV)
• 6.5 L / 396 in3
• 6.6 L / 402 in3
• 7.4 L / 454 in3
CHEVROLET SMALL BLOCK V8 GEN. I
• 4.3 L / 262 in3
• 4.3 L / 265 in3
• 4.4 L / 267 in3
• 4.6 L / 283 in3
• 4.9 L / 302 in3
• 5.0 L / 305 in3
• 5.0 L / 307 in3
• 5.4 L / 327 in3
• 5.7 L / 350 in3
• 6.6 L / 400 in3
NOTE: Will not fit tall deck blocks.
Will not fit if using a governor.
Distributor gear is most compatible with cast iron hydraulic or solid flat tappet camshafts; consult cam manufacturer for recommended gear material.
