GM LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers - Polished
GM LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers - Polished
SKU: SKU: JM8082-3P
In stock
Product Details
Features
- Compatible with GM LS-based small block engines
- Mounts the two most popular LS ignition coils
- 1-Year Warranty
Description
Let's face it, nobody wants an ugly set of ignition coils sitting atop their newly dressed up engine. You can take the time and effort to relocate them or you get a set of TSP's two-piece valve covers. The base has a tall internal height to allow for added valvetrain clearance and features provisions for mounting two of the most popular LS coil packs - no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a smooth top.
Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils.
Specs
| Mounting Style | Center Bolt |
| Finish | Available in Polished, Satin, Black |
| Internal Height | Tall |
| Overall Height | 4.25 In. |
| Baffled | Yes |
| Cover Material | Cast Aluminum |
| Gasket Style | Included One-Piece O-Ring |
| Valve Cover Hardware | Included |
| Coil Cover Hardware | Included |
| Quantity | 2 |
| Coil Cover Mounting Hardware | Included |
| Coil Hardware & Spacers | Included |
| Low-Profile Oil Fill Caps | Included |
| Valve Cover Gaskets | Included |
Engine Fitment
COMPATIBLE WITH
CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS BASED)
• 4.8 L / 293 in3
• 5.3 L / 325 in3
• 5.7 L / 346 in3 commonly referred to as 350
• 6.0 L / 364 in3
• 6.2 L / 376 in3
• 7.0 L / 427 in3
NOTES:
Valve cover base mounts to LS1, LS2, LS3, LS6, and LS7 engines.
Has provisions for Delco 510C (TSP 81015) and D580 style ignition coils.
Q&A
What applications are these valve covers compatible with?
These valve covers are designed for COMPATIBLE WITH, CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS BASED), 4.8 L / 293 in3, 5.3 L / 325 in3, 5.7 L / 346 in3 commonly referred to as 350, 6.0 L / 364 in3, 6.2 L / 376 in3, 7.0 L / 427 in3, NOTES:, Valve cover base mounts to LS1, LS2, LS3, LS6, and LS7 engines., Has provisions for Delco 510C (TSP 81015) and D580 style ignition coils..
Will these valve covers fit my engine?
These valve covers are intended for GM LS applications and should match your cylinder heads and valvetrain setup.
What do valve covers do?
Valve covers protect the valvetrain components and help contain engine oil while sealing the top of the cylinder head.
What material are these valve covers made from?
These valve covers are made from aluminum, providing durability and heat resistance.
What finish do these valve covers have?
These valve covers feature a available in polished, satin, black finish, which enhances engine bay appearance.
Are these valve covers baffled?
Yes, these valve covers include internal baffles to help control oil and reduce blow-by issues.
Do I need gaskets for installation?
Yes, proper gaskets are required to ensure a leak-free seal.
Do I need hardware for installation?
You may need bolts or fasteners depending on your setup.
Will these valve covers help prevent oil leaks?
Yes, properly installed valve covers with correct gaskets help prevent oil leaks.
Are these valve covers a good upgrade over stock?
Yes, aftermarket valve covers can improve durability, oil control, and engine bay appearance.
Can these valve covers clear aftermarket rocker arms?
Tall valve covers are often required to clear larger rocker arms, so clearance should be verified before installation.
Can these valve covers be used in performance builds?
Yes, valve covers are commonly upgraded in performance and custom engine builds.
Emissions Notice
This product does not affect vehicle emissions and is not subject to emissions compliance regulations.
GM LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers - Polished
Let's face it, nobody wants an ugly set of ignition coils sitting atop their newly dressed up engine. You can take the time and effort to relocate them or you get a set of TSP's two-piece valve covers. The base has a tall internal height to allow for added valvetrain clearance and features provisions for mounting two of the most popular LS coil packs - no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a smooth top.
Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils.
Compatible with:
CHEVROLET SMALL BLOCK V8 GEN. III/IV (LS BASED)
• 4.8 L / 293 in3
• 5.3 L / 325 in3
• 5.7 L / 346 in3 commonly referred to as 350
• 6.0 L / 364 in3
• 6.2 L / 376 in3
• 7.0 L / 427 in3
NOTES:
Valve cover base mounts to LS1, LS2, LS3, LS6, and LS7 engines.
Has provisions for Delco 510C (TSP 81015) and D580 style ignition coils.
| Mounting Style | Center Bolt |
| Finish | Available in Polished, Satin, Black |
| Internal Height | Tall |
| Overall Height | 4.25 In. |
| Baffled | Yes |
| Cover Material | Cast Aluminum |
| Gasket Style | Included One-Piece O-Ring |
| Valve Cover Hardware | Included |
| Coil Cover Hardware | Included |
| Quantity | 2 |
| Coil Cover Mounting Hardware | Included |
| Coil Hardware & Spacers | Included |
| Low-Profile Oil Fill Caps | Included |
| Valve Cover Gaskets | Included |
