Chrysler BB 413-440 V8 Ready to Run Distributor
Chrysler BB 413-440 V8 Ready to Run Distributor
SKU: SKU: JM6714BK
In stock
Product Details
Features
- Compact design with clip-on cap
- On-board ignition control module
- Fits Chrysler big block "RB" (413-440) and Hemi 426
- 1-Year Warranty
Description
TSP’s Ready to Run distributor is designed for easy installation. With the included ignition module, all you'll need to complete your set-up is a coil. Using simple design elements throughout, it's a great way to get an easy-to-install ignition at a affordable price. With an aluminum housing, steel internal construction, and a high-quality ignition module, this distributor will get the job done.
This distributor is designed for a 12 volt electrical system with an alternator. It is not compatible with a generator and cannot be used with a ballast resistor.
Specs
| Trigger Type | Multi-Pole Reluctor (Halls Effect) |
| Advance Type | Mechanical And Vacuum |
| Color | Black |
| Terminal Gender | Male |
| Mechanical Tach Drive | No |
| Slip Collar | No |
| Coil Included | No |
| Coil Type | External |
| Recommended Coil Output | 35,000+ V |
| Housing Material | Aluminum |
| Ignition Box Required | No |
| Marine Use | No |
| Cylinders | 8 |
Fitment
CHRYSLER BIG BLOCK "RB" V8
• 6.8 L / 413 in3
• 7.0 L / 426 in3 commonly referred to as "426 Wedge"
• 7.2 L / 440 in3
CHRYSLER HEMI V8 GEN. II
• 426 in3
Chrysler BB 413-440 V8 Ready to Run Distributor
Chrysler BB 413-440 V8 Ready to Run Distributor
Specifications
| TRIGGER STYLE | Multi-pole Reluctor (Halls Effect) |
| ADVANCE TYPE | Mechanical and Vacuum |
| CAP STYLE | Male |
| MECHANICAL TACH DRIVE | No |
| SLIP COLLAR | No |
| COIL INCLUDED | No |
| COIL TYPE | External |
| RECOMMENDED COIL OUTPUT | 35,000+ volts |
| HOUSING MATERIAL | Aluminum |
| IGNITION BOX REQUIRED | No |
| MARINE USE | No |
| CYLINDERS | 8 |
Overview
TSP's Ready to Run distributor is designed for easy installation. With the included ignition module, all you'll need to complete your set-up is a coil. Using simple design elements throughout, it's a great way to get an easy-to-install ignition at a affordable price. With an aluminum housing, steel internal construction, and a high-quality ignition module, this distributor will get the job done.
This distributor is designed for a 12 volt electrical system with an alternator. It is not compatible with a generator and cannot be used with a ballast resistor.
Fitment
CHRYSLER BIG BLOCK "RB" V8
- 6.8 L / 413 in3
- 7.0 L / 426 in3 commonly referred to as "426 Wedge"
- 7.2 L / 440 in3
CHRYSLER HEMI V8 GEN. II
- 426 in3
ALERT
This product is legal for off road use and non pollution controlled vehicles (1965 & older); however, it has not been tested or approved by the California Air Resources Board (CARB) for highway vehicles in the state of California. By purchasing this product, buyer agrees it will not be used on pollution controlled vehicles in California, or in a state with similar emissions regulations.
Resources
Part Numbers
| Black | JM6714BK |
| Blue | JM6714BL |
| Red | JM6714R |
