{"title":"Ford Intake Manifolds","description":"\u003cp\u003eShop high-performance Ford intake manifolds for small block Ford engines, including popular 289, 302, and 351 Windsor V8 applications. Designed to improve airflow, throttle response, and horsepower, these aluminum intake manifolds are ideal for carbureted street and performance builds. Available in satin, polished, and black finishes to match your engine bay.\u003c\/p\u003e\n\u003c!--split--\u003e\n\u003cp\u003eFord intake manifolds are a proven upgrade for small block Ford engines, especially for popular 302 and 351 Windsor combinations. Replacing a factory cast iron intake manifold with a lightweight aluminum performance intake helps improve airflow, reduce weight, and support better throttle response and overall engine efficiency.\u003c\/p\u003e\n\u003cp\u003eFor carbureted street applications, dual plane intake manifolds are the preferred choice because they enhance low-end torque and drivability while maintaining strong mid-range performance. This makes them ideal for classic Ford builds, muscle cars, and street-driven performance setups that require balanced power across the RPM range.\u003c\/p\u003e\n\u003cp\u003eCommon applications include 289, 302, and 351W engines, where upgrading the intake manifold helps optimize air and fuel distribution for improved combustion and performance. Whether you're restoring a classic Ford or building a more responsive street machine, a performance intake manifold is a key component in maximizing horsepower, drivability, and reliability.\u003c\/p\u003e\n\u003ch3\u003eShop Intake Manifolds by Engine Platform\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/chevrolet-intake-manifolds\"\u003eChevrolet Intake Manifolds\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/mopar-intake-manifolds\"\u003eMopar Intake Manifolds\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/pontiac-intake-manifolds\"\u003ePontiac Intake Manifolds\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated Air \u0026amp; Fuel Components\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/air-filters\"\u003eAir Filters\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/fuel-injection\"\u003eFuel Injection Systems\u003c\/a\u003e\u003c\/li\u003e\n  \u003cli\u003e\u003ca href=\"\/collections\/fuel-pumps-and-regulators\"\u003eFuel Pumps \u0026amp; Regulators\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"velocity-ford-coyote-o-ring-hardware-kit","title":"Velocity Ford Coyote O-Ring \u0026 Hardware Kit","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\n\u003cbr\u003eFits Ford 5.0L Coyote engines with TSP Velocity intake manifold (84050)\n\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nIntake Port O-rings Included: Yes\u003cbr\u003e\nIntake Port Shape: Oval with Dimple\u003cbr\u003e\nMounting Hardware Included: Yes","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49450944954664,"sku":"84750","price":18.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84050ca-1-1600.jpg?v=1730218306"},{"product_id":"velocity-ford-5-0l-coyote-efi-fabricated-aluminum-sheet-metal-intake-manifold-clear-anodized","title":"Velocity Ford 5.0L Coyote EFI Fabricated Aluminum Sheet Metal Intake Manifold - Clear Anodized","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003eCompatible with won't be an issue.\n\u003cp\u003eCompatible with: \u003cbr\u003eFORD MODULAR V8 \u003cbr\u003e• 5.0 L \/ 302 in3 \"Coyote\"\u003c\/p\u003e\n\u003cp\u003eNOTE: As this uses the stock 4-bolt throttle body bolt pattern, it will not fit TSP throttle bodies.\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 2,000-6,500 RPM\u003cbr\u003e\nCenter Maximum Height: 8.000 in.\u003cbr\u003e\nColor: Clear Anodized\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nFront Maximum Height: 8.000 in.\u003cbr\u003e\nFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003e\nFuel Injector Stye Provision: EV1\u003cbr\u003e\nFuel System Type: Electronic Fuel Injection\u003cbr\u003e\nGasket Or Seal Included: Yes\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Oval with Dimple\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nPlenum Material: Aluminum\u003cbr\u003e\nPlenum Thickness: 3.50 mm\u003cbr\u003e\nRear Maximum Height: 8.000 in.\u003cbr\u003e\nRunner Length: 5.000 in.\u003cbr\u003e\nSupplemental Boss Quantity: 4\u003cbr\u003e\nThrottle Body Bore Size: 90 mm","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562060554536,"sku":"84050CA","price":672.23,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84050ca-1600.jpg?v=1732637102"},{"product_id":"ford-small-block-carbureted-aluminum-dual-plane-intake-manifold","title":"Ford Small Block Carbureted Aluminum Dual Plane Intake Manifold - Polished","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\u003cp\u003eNOTES: \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is considered stock replacement for 289 engines with factory style carb from 1965-1966.\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.900 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Polished\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.500 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49636945658152,"sku":"84000","price":430.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84000p-1-1600_2_dbce0036-051d-4d8d-bc09-3e88877c93bb.jpg?v=1736293325"},{"product_id":"ford-big-block-fe-carbureted-dual-plane-aluminum-intake-manifold-satin","title":"Ford Big Block FE Carbureted Dual Plane Aluminum Intake Manifold - Satin","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD BIG BLOCK FE V8 \u003cbr\u003e• 5.4 L \/ 332 in3 1958-1963 \u003cbr\u003e• 5.8 L \/ 352 in3 1957-1967 \u003cbr\u003e• 5.9 L \/ 360 in3 1964-1977 \u003cbr\u003e• 5.9 L \/ 361 in3 1958-1966 \u003cbr\u003e• 6.4 L \/ 390 in3 1961-1977 \u003cbr\u003e• 6.7 L \/ 406 in3 1962-1963 \u003cbr\u003e• 7.0 L \/ 427 in3 1963-1969 \u003cbr\u003e• 7.0 L \/ 428 in3 1965-1970\n\u003cp\u003eNOTES: \u003cbr\u003eFits medium and low-rise heads. \u003cbr\u003eWill not fit OE spread bore carburetor.\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 5.460 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Satin\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.890 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 6.040 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49672451752232,"sku":"84008","price":513.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84008_004_d7895158-618d-46d3-a9bd-f03317aa5fe9.jpg?v=1736293258"},{"product_id":"ford-small-block-carbureted-polished-aluminum-dual-plane-air-gap-intake-manifold","title":"Ford Small Block Carbureted Polished Aluminum Dual Plane Air Gap Intake Manifold","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 3.6 L \/ 221 in3 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\u003cp\u003eNOTES: \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is stock replacement and street legal for 289 engines with factory style carb from 1965-1966.\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.900 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Polished\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.500 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562210500904,"sku":"84025","price":415.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/85025_002_1.jpg?v=1732640341"},{"product_id":"ford-small-block-carbureted-aluminum-dual-plane-air-gap-intake-manifold-satin","title":"Ford Small Block Carbureted Aluminum Dual Plane Air Gap Intake Manifold - Satin","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 3.6 L \/ 221 in3 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\u003cp\u003eNOTES: \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is stock replacement and street legal for 289 engines with factory style carb from 1965-1966.\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.900 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Satin\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.500 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49774457192744,"sku":"84026","price":317.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84026s-1-1600_1.jpg?v=1732640346"},{"product_id":"manifold-heat-spacer-ford-stock-efi-5-0l-gasket","title":"Ford 5.0L EFI Intake Manifold Phenolic Spacer Gasket","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\n\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\n\u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\n\u003cp\u003eNOTE: Fits 1986-1993 Ford 5.0L EFI engines equipped with standard OEM intake manifold.\u003c\/p\u003e\n\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nMaterial: Fiber\u003cbr\u003e\nQuantity: Sold Individually","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562300481832,"sku":"SP6133","price":20.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp6133-100.jpg?v=1732642746"},{"product_id":"manifold-heat-spacer-ford-gt40-efi-5-0l-gasket","title":"Ford 5.0L EFI GT40 Intake Manifold Phenolic Spacer Gasket","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\n\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\n\u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\n\u003cp\u003eNOTE: Fits 1986-1993 Ford 5.0L EFI engines equipped with GT40 intake manifold.\u003c\/p\u003e\n\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nMaterial: Fiber\u003cbr\u003e\nQuantity: Sold Individually","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562300645672,"sku":"SP6134","price":9.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp6134-100.jpg?v=1732642751"},{"product_id":"manifold-heat-spacer-ford-gt-40-1-2-thick-with-gaskets-hardware-phenolic","title":"Ford 5.0L EFI GT40 1\/2\" Intake Manifold Phenolic Spacer","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\u003c\/p\u003e\n\u003cp\u003eNOTE: Fits 1986-1993 Ford 5.0L EFI engines equipped with GT40 intake manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eSpacer Material: Phenolic Plastic\u003cbr\u003eSpacer Finish: Black\u003cbr\u003eThickness: 1\/2\"\u003cbr\u003eGaskets: Included\u003cbr\u003eMounting Hardware: Included\u003cbr\u003eIncluded: Spacer, (2) Gaskets, Mounting Hardware\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562510426408,"sku":"SP8436","price":41.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp8436-100.jpg?v=1732645086"},{"product_id":"manifold-heat-spacer-ford-stock-efi-5-0l-with-gaskets-hardware-phenolic","title":"Ford 5.0L EFI Intake Manifold Phenolic Spacer","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\u003c\/p\u003e\n\u003cp\u003eNOTE: Fits 1986-1993 Ford 5.0L EFI engines equipped with standard OEM intake manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eSpacer Material: Phenolic Plastic\u003cbr\u003eSpacer Finish: Black\u003cbr\u003eThickness: 1\/2\"\u003cbr\u003eGaskets: Included\u003cbr\u003eMounting Hardware: Included\u003cbr\u003eIncluded: Spacer (2) Gaskets Mounting Hardware\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562510655784,"sku":"SP8437","price":41.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp8437-100.jpg?v=1732645091"},{"product_id":"manifold-heat-spacer-ford-gt-40-1-thick-with-gaskets-hardware-phenolic","title":"Ford 5.0L EFI GT40 1\" Intake Manifold Phenolic Spacer","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\u003c\/p\u003e\n\u003cp\u003eNOTE: Fits 1986-1993 Ford 5.0L EFI engines equipped with GT40 intake manifold.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eSpacer Material: Phenolic Plastic\u003cbr\u003eSpacer Finish: Black\u003cbr\u003eThickness: 1\"\u003cbr\u003eGaskets: Included\u003cbr\u003eMounting Hardware: Included\u003cbr\u003eIncluded: Spacer\/(2) Gaskets\/Mounting Hardware\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562512523560,"sku":"SP8438","price":55.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp8438-100.jpg?v=1732645096"},{"product_id":"bolt-kit-sb-ford-intake-hex-head-12pc-kit-chrome-steel","title":"Ford Small Block Chrome Steel Hex Head Intake Manifold Bolt Kit","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L \u003cbr\u003e• 5.8 L \/ 351 in3 generally referred to as 351W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFastener Style: Bolt\u003cbr\u003eFastener Material: Steel\u003cbr\u003eFastener Finish: Chrome\u003cbr\u003eFastener Nut Style: Hex\u003cbr\u003eThread Length: 2\"\u003cbr\u003eThread Size: 5\/16\" - 18\u003cbr\u003eWashers: Included\u003cbr\u003eQuantity: Set Of 12\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562547683624,"sku":"SP9837","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp9837-100.jpg?v=1732645893"},{"product_id":"bolt-kit-sb-ford-intake-12pt-head-12pc-kit-chrome-steel","title":"Ford Small Block Chrome Steel 12-Point Head Intake Manifold Bolt Kit","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003c\/p\u003e\n\u003cp\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L \u003cbr\u003e• 5.8 L \/ 351 in3 generally referred to as 351W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFastener Style: Bolt\u003cbr\u003eFastener Material: Steel\u003cbr\u003eFastener Finish: Chrome\u003cbr\u003eFastener Nut Style: 12-Point\u003cbr\u003eThread Length: 2\"\u003cbr\u003eThread Size: 5\/16\" - 18\u003cbr\u003eWashers: Included\u003cbr\u003eQuantity: Set Of 12\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562548044072,"sku":"SP9838","price":30.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp9838-100.jpg?v=1732645898"},{"product_id":"bolt-kit-sb-ford-intake-soc-head-12pc-kit-gold-zinc-steel","title":"Ford Small Block Gold Zinc Steel Allen Head Intake Manifold Bolt Kit","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003c\/p\u003e\n\u003cp\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L \u003cbr\u003e• 5.8 L \/ 351 in3 generally referred to as 351W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eFastener Style: Bolt\u003cbr\u003eFastener Material: Steel\u003cbr\u003eFastener Finish: Gold Zinc\u003cbr\u003eFastener Nut Style: Allen\u003cbr\u003eThread Length: 2\"\u003cbr\u003eThread Size: 5\/16\" - 18\u003cbr\u003eWashers: Included\u003cbr\u003eQuantity: Set Of 12\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49562548928808,"sku":"SP9839","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/sp9839-100.jpg?v=1732645903"},{"product_id":"ford-7-3l-godzilla-v-series-billet-aluminum-intake-manifold-natural","title":"Ford 7.3L Godzilla V Series Billet Aluminum Intake Manifold - Natural","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e\n\u003cbr\u003eFORD 7X V8\n\u003cbr\u003e• 7.3 L \/ 445 in3\n\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nInjection Style: Multi-port\u003cbr\u003e\nFuel Rail Style: Custom V Series (Included)\u003cbr\u003e\nMaterial: T-6061 Billet Aluminum\u003cbr\u003e\nFinish: Available in Natural or Black\u003cbr\u003e\nOverall Height: 10.25 in.\u003cbr\u003e\nThrottle Body Flange: Stock Coyote\/Godzilla Bolt Pattern","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808269771048,"sku":"73041","price":3824.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/73041_01.jpg?v=1770915300"},{"product_id":"ford-429-460-big-block-v8-dual-plane-aluminum-intake-manifold-polished","title":"Ford 429\/460 Big Block V8 Dual Plane Aluminum Intake Manifold - Polished","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD BIG BLOCK \"385\" V8\u003cbr\u003e• 7.0 L \/ 429 in3\u003cbr\u003e• 7.5 L \/ 460 in3\u003c\/p\u003e\n\u003cp\u003eNOTES: Will not fit Cobra Jet cylinder heads or factory style 4-bbl carburetors\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: Idle-5,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 4.850 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Polished\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.200 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.500 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808366928168,"sku":"82166P","price":660.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/82166P_01.jpg?v=1742247785"},{"product_id":"ford-5-0l-coyote-v-series-billet-aluminum-intake-manifold-natural","title":"Ford 5.0L Coyote V Series Billet Aluminum Intake Manifold - Natural","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD MODULAR V8 \u003cbr\u003e• 5.0 L \/ 302 in3\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 200-9,000 RPM\u003cbr\u003eCenter Maximum Height: 10.200 in.\u003cbr\u003eColor: Silver\u003cbr\u003eDeck Height: Standard\u003cbr\u003eFront Maximum Height: 8.850 in.\u003cbr\u003eFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eFuel Rail Color: Silver\u003cbr\u003eFuel Rail Finish: Natural\u003cbr\u003eFuel Rail Material: Aluminum\u003cbr\u003eFuel Rails Included: Yes\u003cbr\u003eFuel System Type: Electronic Fuel Injection\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Oval with Dimple\u003cbr\u003eManifold Finish: Natural\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eMounting Hardware Included: Yes\u003cbr\u003eMounting Hole Quantity: 10\u003cbr\u003ePlenum Thickness: 8 mm\u003cbr\u003eRear Maximum Height: 9.024 in.\u003cbr\u003eRemovable Runners: Yes\u003cbr\u003eRemovable Throttle Body Flange: Yes\u003cbr\u003eRemovable Top: Yes\u003cbr\u003eRunner Length: 4.311 in.\u003cbr\u003eSingle Or Dual Plane Type: Single Plane\u003cbr\u003eSupplemental Boss Quantity: 4\u003cbr\u003eThrottle Body Bore Size: 92 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808386916648,"sku":"84064","price":3824.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84064_01.jpg?v=1753386685"},{"product_id":"ford-351c-v8-2v-4v-dual-plane-aluminum-intake-manifold-polished","title":"Ford 351C V8 2V\/4V Dual Plane Aluminum Intake Manifold - Polished","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD CLEVELAND \"335\" V8\u003cbr\u003e• 5.8 L \/ 351 in3\u003c\/p\u003e\n\u003cp\u003eNote: 2V\/4V Design:\u003cbr\u003eThe intake runners are engineered to properly align and seal with both 2V and 4V cylinder heads, making this manifold compatible with either configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 5.020 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Polished\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.480 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.560 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49808525164840,"sku":"87564P","price":430.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/87564P_01.jpg?v=1739217035"},{"product_id":"ford-small-block-carbureted-aluminum-dual-plane-intake-manifold-black","title":"Ford Small Block Carbureted Aluminum Dual Plane Intake Manifold - Black","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is considered stock replacement for 289 engines with factory style carb from 1965-1966.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 4.900 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Black\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.300 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.500 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970276041000,"sku":"84001BK","price":366.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84001BK_01.jpg?v=1767121873"},{"product_id":"ford-small-block-carbureted-aluminum-dual-plane-intake-manifold-satin","title":"Ford Small Block Carbureted Aluminum Dual Plane Intake Manifold - Satin","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\u003c\/p\u003e\n\u003cp\u003eNOTES: \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is considered stock replacement for 289 engines with factory style carb from 1965-1966.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 4.900 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Satin\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.300 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.500 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970279481640,"sku":"84001","price":332.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84001-1600_1_607eea90-4bc8-441c-ad2d-41523c137e7e.jpg?v=1736293325"},{"product_id":"ford-big-block-fe-carbureted-dual-plane-aluminum-intake-manifold-black","title":"Ford Big Block FE Carbureted Dual Plane Aluminum Intake Manifold - Black","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD BIG BLOCK FE V8 \u003cbr\u003e• 5.4 L \/ 332 in3 1958-1963 \u003cbr\u003e• 5.8 L \/ 352 in3 1957-1967 \u003cbr\u003e• 5.9 L \/ 360 in3 1964-1977 \u003cbr\u003e• 5.9 L \/ 361 in3 1958-1966 \u003cbr\u003e• 6.4 L \/ 390 in3 1961-1977 \u003cbr\u003e• 6.7 L \/ 406 in3 1962-1963 \u003cbr\u003e• 7.0 L \/ 427 in3 1963-1969 \u003cbr\u003e• 7.0 L \/ 428 in3 1965-1970\u003c\/p\u003e\n\u003cp\u003eNOTES: \u003cbr\u003eFits medium and low-rise heads. \u003cbr\u003eWill not fit OE spread bore carburetor.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 5.460 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Black\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.890 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 6.040 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970296750376,"sku":"84008BK","price":537.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84008bk_004.jpg?v=1736293258"},{"product_id":"ford-big-block-fe-carbureted-dual-plane-aluminum-intake-manifold-polished","title":"Ford Big Block FE Carbureted Dual Plane Aluminum Intake Manifold - Polished","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD BIG BLOCK FE V8 \u003cbr\u003e• 5.4 L \/ 332 in3 1958-1963 \u003cbr\u003e• 5.8 L \/ 352 in3 1957-1967 \u003cbr\u003e• 5.9 L \/ 360 in3 1964-1977 \u003cbr\u003e• 5.9 L \/ 361 in3 1958-1966 \u003cbr\u003e• 6.4 L \/ 390 in3 1961-1977 \u003cbr\u003e• 6.7 L \/ 406 in3 1962-1963 \u003cbr\u003e• 7.0 L \/ 427 in3 1963-1969 \u003cbr\u003e• 7.0 L \/ 428 in3 1965-1970\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTES:\u003c\/strong\u003e \u003cbr\u003eFits medium and low-rise heads. \u003cbr\u003eWill not fit OE spread bore carburetor.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 5.460 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Polished\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.890 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 6.040 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970313429288,"sku":"84008P","price":611.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84008P_06.jpg?v=1742924362"},{"product_id":"ford-429-460-big-block-v8-dual-plane-aluminum-intake-manifold-black","title":"Ford 429\/460 Big Block V8 Dual Plane Aluminum Intake Manifold - Black","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD BIG BLOCK \"385\" V8\u003cbr\u003e• 7.0 L \/ 429 in3\u003cbr\u003e• 7.5 L \/ 460 in3\u003c\/p\u003e\n\u003cp\u003eNOTE: Will not fit Cobra Jet cylinder heads or factory style 4-bbl carburetors\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: Idle-5,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 4.850 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Black\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.200 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.500 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970345607464,"sku":"82166BK","price":562.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/82166BK_01.jpg?v=1742247785"},{"product_id":"ford-429-460-big-block-v8-dual-plane-aluminum-intake-manifold-satin","title":"Ford 429\/460 Big Block V8 Dual Plane Aluminum Intake Manifold - Satin","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD BIG BLOCK \"385\" V8\u003cbr\u003e• 7.0 L \/ 429 in3\u003cbr\u003e• 7.5 L \/ 460 in3\u003c\/p\u003e\n\u003cp\u003eNOTES: Will not fit Cobra Jet cylinder heads or factory style 4-bbl carburetors\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: Idle-5,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 4.850 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Satin\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.200 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.500 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970360287528,"sku":"82166","price":537.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/82166_01.jpg?v=1742247785"},{"product_id":"ford-351c-v8-2v-4v-dual-plane-aluminum-intake-manifold-black","title":"Ford 351C V8 2V\/4V Dual Plane Aluminum Intake Manifold - Black","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD CLEVELAND \"335\" V8\u003cbr\u003e• 5.8 L \/ 351 in3\u003c\/p\u003e\n\u003cp\u003eNote: 2V\/4V Design:\u003cbr\u003eThe intake runners are engineered to properly align and seal with both 2V and 4V cylinder heads, making this manifold compatible with either configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 5.020 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Black\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.480 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.560 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970370412840,"sku":"87564BK","price":356.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/87564BK_01.jpg?v=1739217035"},{"product_id":"ford-351c-v8-2v-4v-dual-plane-aluminum-intake-manifold-satin","title":"Ford 351C V8 2V\/4V Dual Plane Aluminum Intake Manifold - Satin","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCOMPATIBLE WITH\u003c\/strong\u003e\u003cbr\u003eFORD CLEVELAND \"335\" V8\u003cbr\u003e• 5.8 L \/ 351 in3\u003c\/p\u003e\n\u003cp\u003eNote: 2V\/4V Design:\u003cbr\u003eThe intake runners are engineered to properly align and seal with both 2V and 4V cylinder heads, making this manifold compatible with either configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003eCarburetor Flange Style: 4150 Square Bore\u003cbr\u003eCarburetor Quantity: 1\u003cbr\u003eCenter Maximum Height: 5.020 in.\u003cbr\u003eCNC Ported: No\u003cbr\u003eColor: Satin\u003cbr\u003eDeck Height: Standard\u003cbr\u003eEGR: No\u003cbr\u003eFront Maximum Height: 4.480 in.\u003cbr\u003eFuel System Type: Carbureted\u003cbr\u003eGasket Or Seal Included: No\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Rectangle\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eRear Maximum Height: 5.560 in.\u003cbr\u003eSingle Or Dual Plane Type: Dual Plane\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":49970390434088,"sku":"87564","price":332.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/87564_01.jpg?v=1742926595"},{"product_id":"ford-7-3l-godzilla-v-series-billet-aluminum-intake-manifold-black","title":"Ford 7.3L Godzilla V Series Billet Aluminum Intake Manifold - Black","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD 7X V8 \u003cbr\u003e• 7.3 L \/ 445 in3\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eInjection Style: Multi-port\u003cbr\u003eFuel Rail Style: Custom V Series (Included)\u003cbr\u003eMaterial: T-6061 Billet Aluminum\u003cbr\u003eFinish: Available in Natural or Black\u003cbr\u003eOverall Height: 10.25 in.\u003cbr\u003eThrottle Body Flange: Stock Coyote\/Godzilla Bolt Pattern\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50010226524456,"sku":"73041BK","price":4780.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/73041BK_01.jpg?v=1770915221"},{"product_id":"ford-5-0l-coyote-v-series-billet-aluminum-intake-manifold-black","title":"Ford 5.0L Coyote V Series Billet Aluminum Intake Manifold - Black","description":"\u003cp\u003eDesigned for Ford small block applications, this intake manifold is built to support balanced airflow distribution, dependable throttle response, and strong mid-range performance in properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD MODULAR V8 \u003cbr\u003e• 5.0 L \/ 302 in3\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003eBasic Operating RPM Range: 200-9,000 RPM\u003cbr\u003eCenter Maximum Height: 10.200 in.\u003cbr\u003eColor: Silver\u003cbr\u003eDeck Height: Standard\u003cbr\u003eFront Maximum Height: 8.850 in.\u003cbr\u003eFuel Injection Style: Multi-port Fuel Injection\u003cbr\u003eFuel Injector Stye Provision: EV1\u003cbr\u003eFuel Rail Color: Silver\u003cbr\u003eFuel Rail Finish: Natural\u003cbr\u003eFuel Rail Material: Aluminum\u003cbr\u003eFuel Rails Included: Yes\u003cbr\u003eFuel System Type: Electronic Fuel Injection\u003cbr\u003eGasket Or Seal Included: Yes\u003cbr\u003eGrade Type: Performance\u003cbr\u003eIntake Port Shape: Oval with Dimple\u003cbr\u003eManifold Finish: Natural\u003cbr\u003eMaterial: Aluminum\u003cbr\u003eMounting Hardware Included: Yes\u003cbr\u003eMounting Hole Quantity: 10\u003cbr\u003ePlenum Thickness: 8 mm\u003cbr\u003eRear Maximum Height: 9.024 in.\u003cbr\u003eRemovable Runners: Yes\u003cbr\u003eRemovable Throttle Body Flange: Yes\u003cbr\u003eRemovable Top: Yes\u003cbr\u003eRunner Length: 4.311 in.\u003cbr\u003eSingle Or Dual Plane Type: Single Plane\u003cbr\u003eSupplemental Boss Quantity: 4\u003cbr\u003eThrottle Body Bore Size: 92 mm\u003c\/p\u003e","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50020608377128,"sku":"84064BK","price":4780.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84064BK_01.jpg?v=1770053235"},{"product_id":"ford-small-block-carbureted-aluminum-dual-plane-air-gap-intake-manifold-black","title":"Ford Small Block Carbureted Aluminum Dual Plane Air Gap Intake Manifold - Black","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003e\u003cb\u003eCOMPATIBLE WITH:\u003c\/b\u003e \u003cbr\u003eFORD SMALL BLOCK WINDSOR V8 \u003cbr\u003e• 3.6 L \/ 221 in3 \u003cbr\u003e• 4.3 L \/ 260 in3 \u003cbr\u003e• 4.7 L \/ 289 in3 \u003cbr\u003e• 4.9 L \/ 302 in3 generally referred to as 5.0 L\n\u003cp\u003eNOTES: \u003cbr\u003eWill not fit 255, Boss 302, or 351W. \u003cbr\u003eManifold is designed for street use on 1965–1966 289 engines when used with a factory-style carburetor.\u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.900 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Black\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.500 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50020703240488,"sku":"84026BK","price":342.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84026BK_01.jpg?v=1748635199"},{"product_id":"ford-351w-carbureted-aluminum-dual-plane-intake-manifold-satin","title":"Ford 351W Carbureted Aluminum Dual Plane Intake Manifold - Satin","description":"\u003cp\u003eThis intake manifold is engineered for Ford small block applications and helps support consistent airflow, clean fuel distribution, and dependable street performance operation across a wide range of compatible builds.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003eCOMPATIBLE WITH\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003cbr\u003e• 5.8 L \/ 351 in3 \"351W\"\n\u003cp\u003eNOTE: Will not fit 351C or 351M\u003cbr\u003eWill not fit any other \"Windsor\" engine displacements (221, 260, 289, 302)\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.800 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Satin\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.300 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50599161626920,"sku":"84023","price":322.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84023_002.jpg?v=1757091394"},{"product_id":"ford-351w-carbureted-aluminum-dual-plane-intake-manifold-black","title":"Ford 351W Carbureted Aluminum Dual Plane Intake Manifold - Black","description":"\u003cp\u003eBuilt for upgraded induction performance, this intake manifold supports improved airflow characteristics and stable fuel delivery for Ford small block applications using properly matched carburetor or EFI configurations.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003eCOMPATIBLE WITH\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003cbr\u003e• 5.8 L \/ 351 in3 \"351W\"\n\u003cp\u003eNOTE: Will not fit 351C or 351M\u003cbr\u003eWill not fit any other \"Windsor\" engine displacements (221, 260, 289, 302)\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.800 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Black\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.300 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50599162052904,"sku":"84023BK","price":352.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84023BK_01.jpg?v=1757606632"},{"product_id":"ford-351w-carbureted-aluminum-dual-plane-intake-manifold-polished","title":"Ford 351W Carbureted Aluminum Dual Plane Intake Manifold - Polished","description":"\u003cp\u003eFor applications that need reliable intake airflow and clean engine-bay fitment, this intake manifold combines durable construction with application-focused runner and plenum design.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAirflow \u0026amp; Performance Design\u003c\/strong\u003e\u003cbr\u003eThe intake runner and plenum design help support balanced airflow delivery between cylinders while maintaining stable throttle response and dependable street-driven performance. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConstruction \u0026amp; Engine-Bay Fitment\u003c\/strong\u003e\u003cbr\u003eThe manifold construction to support long-term durability, heat management, and a clean installed appearance in demanding engine-bay environments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInstallation Considerations\u003c\/strong\u003e\u003cbr\u003eProper installation requires confirming cylinder head compatibility, intake gasket alignment, carburetor or throttle-body configuration, distributor clearance, and hood clearance before final assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSystem Matching\u003c\/strong\u003e\u003cbr\u003eVerify fuel system compatibility, throttle linkage setup, vacuum routing, sensor provisions, and accessory clearance before installation. This intake manifold is intended for properly matched engine combinations.\u003c\/p\u003eCOMPATIBLE WITH\u003cbr\u003eFORD SMALL BLOCK WINDSOR V8\u003cbr\u003e• 5.8 L \/ 351 in3 \"351W\"\n\u003cp\u003eNOTE: Will not fit 351C or 351M\u003cbr\u003eWill not fit any other \"Windsor\" engine displacements (221, 260, 289, 302)\u003c\/p\u003e\n\u003cbr\u003e\u003cb\u003eCOMMON VEHICLE APPLICATIONS:\u003c\/b\u003e\u003cbr\u003eFord Mustang\u003cbr\u003eFord F-100\u003cbr\u003eFord Bronco\u003cbr\u003eMercury Cougar\u003cbr\u003eFord Fairlane\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSPECIFICATIONS:\u003c\/b\u003e\u003cbr\u003e\nBasic Operating RPM Range: 1,500-6,500 RPM\u003cbr\u003e\nCarburetor Flange Style: 4150 Square Bore\u003cbr\u003e\nCarburetor Quantity: 1\u003cbr\u003e\nCenter Maximum Height: 4.800 in.\u003cbr\u003e\nCNC Ported: No\u003cbr\u003e\nColor: Polished\u003cbr\u003e\nDeck Height: Standard\u003cbr\u003e\nEGR: No\u003cbr\u003e\nFront Maximum Height: 4.300 in.\u003cbr\u003e\nFuel System Type: Carbureted\u003cbr\u003e\nGasket Or Seal Included: No\u003cbr\u003e\nGrade Type: Performance\u003cbr\u003e\nIntake Port Shape: Rectangle\u003cbr\u003e\nMaterial: Aluminum\u003cbr\u003e\nRear Maximum Height: 5.300 in.\u003cbr\u003e\nSingle Or Dual Plane Type: Dual Plane","brand":"Top Street Performance","offers":[{"title":"Default Title","offer_id":50599166116136,"sku":"84022","price":352.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/8356\/5608\/files\/84022_01.jpg?v=1773163434"}],"url":"https:\/\/topstreetperformance.com\/collections\/ford-intake-manifolds.oembed?page=2","provider":"Top Street Performance","version":"1.0","type":"link"}